Lost Ancient High Technology In Egypt: Saw Marks And Drill Holes

There are many examples in Egypt where we can see that very advanced high technology once existed. To learn more about this, from my 4 trips to Egypt, check ...

Views: 68

Add a Comment

You need to be a member of The ConTrail to add comments!

Join The ConTrail

Comment by robert bryant on August 11, 2017 at 15:15

I use an 8 - 1/2 inch saw and a 12 inch saw on wood, but an 18 foot diameter blade to cut stone would require a massive carriage to support the motor and blade assembly, but you could bet that it would be able to cut large blocks of stone in a very flat plane. Might help explain how stone blocks in so many of the ancient structures  fit in a very flat , fine fashion...

chassis of some type to move and support  the motor  and blade assembly. 

© 2017   Created by rose.   Powered by

Badges  |  Report an Issue  |  Terms of Service